134d www.vishay.com vishay sprague revision: 21-mar-13 1 document number: 40072 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wet tantalum hi-tmp ? capacitors tantalum case with glass-to-tantalum hermetic seal for - 55 c to + 200 c operation features ? high capacitance ? hermetically sealed, tantalum case ? + 200 c high temperature ?terminations: axial, standard tin/lead (snpb) ? 100 % tin (rohs-compliant) available ? mounting: through-hole ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. applications ? industrial ? petroleum exploration ? high temperatu re/high stress environment performance characteristics operating temperature: - 55 c to + 85 c (to + 200 c with voltage derating) capacitance tolerance: at 120 hz, + 25 c; 20 % standard; 10 % dc leakage current (dcl max.): at + 25 c and above: leakage current shall not exceed the values listed in the standard ratings tables. life test: capacitors are capable of withstanding a 500 h life test at a temperature of + 200 c at the applicable derated dc working voltage. note ? packaging: the use of formed plastic trays for packaging these ax ial lead components is standard. tape and reel is not availab le due to the unit weight. note (1) for insulated parts, add 0.015 inches [0.38 mm] to the diameter. the insu lation shall lap over the en ds of the capacitor body. ordering information 134d 227 x0 100 k 6 e3 type capacitance capacitance tolerance dc voltage rating at + 85 c case code style number rohs compliant this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v) see ratings and case codes table high temperature 8 = no outer insulating sleeve 6 = high temperature film insulation (above + 125 c) e3 = 100 % tin termination (rohs compliant design) blank = snpb termination (standard design) dimensions in inches [millimeters] case code dl 1 (1) l 2 (max.) e weight (g) (max.) type 134d clr 79/81 equiv. ct1 0.188 0.016 [4.78 0.41] 0.453 + 0.031/- 0.016 [11.51 + 0.79/- 0.41] 0.734 [18.64] 1.500 0.250 [38.10 6.35] 2.6 ft2 0.281 0.016 [7.14 0.41] 0.641 + 0.031/- 0.016 [16.28 + 0.79/- 0.41] 0.922 [23.42] 2.250 0.250 [57.15 6.35] 6.2 tt3 0.375 0.016 [9.53 0.41] 0.766 + 0.031/- 0.016 [19.46 + 0.79/- 0.41] 1.047 [26.59] 2.250 0.250 [57.15 6.35] 11.6 kt4 0.375 0.016 [9.53 0.41] 1.062 + 0.031/- 0.016 [26.97 + 0.79/- 0.41] 1.343 [34.11] 2.250 0.250 [57.15 6.35] 17.7 l 2 weld tantalum 0.0253 0.002 [0.64 0.05] dia. (no. 22 awg tinned nickel leads solderable and weldable) d el 1 e
134d www.vishay.com vishay sprague revision: 21-mar-13 2 document number: 40072 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? part number definitions: (1) capacitance to lerance: x9 = 10 %, x0 = 20 % (2) style number: 8 = no film insulation , 6 = high temperature film isulation (3) termination: blank = standard tin/lead, e3 = rohs compliant 100 % tin standard ratings capacitance at 25 c 120 hz (f) case code max. 120 hz esr ( ? ) max. dcl (a) max. imp., z at - 25 c ( ? ) max. ? cap. at - 25 c (%) typ. imp., z at - 55 c ( ? ) typ. ? cap. at - 55 c (%) typ. ? cap. (%) ac ripple 85 c 40 khz (ma) rms part number 25 c 85 c/ 125 c 85 c 125 c 50 v dc at 85 c; 30 v dc at 125 c; 30 v dc at 200 c 68 c 1.50 1 5 22 - 6 25 - 11 12 55 1400 134d686(1)050c(2)(3) 220 f 0.90 2 10 9 - 15 10 - 25 13 50 2300 134d227(1)050f(2)(3) 470 t 0.75 3 25 6 - 24 8 - 50 10 25 2650 134d477(1)050t(2)(3) 680 k 0.70 5 40 4 - 22 5 - 40 12 40 2900 134d687(1)050k(2)(3) 60 v dc at 85 c; 40 v dc at 125 c; 36 v dc at 200 c 47 c 2.00 1 5 34 - 8 40 - 20 8 12 1250 134d476(1)060c(2)(3) 150 f 1.10 2 10 13 - 11 15 - 25 10 30 2050 134d157(1)060f(2)(3) 390 t 0.90 3 25 7 - 27 10 - 50 10 25 2450 134d397(1)060t(2)(3) 560 k 0.80 5 40 5 - 21 6 - 40 12 40 2700 134d567(1)060k(2)(3) 75 v dc at 85 c; 50 v dc at 125 c; 45 v dc at 200 c 33 c 2.50 1 5 45 - 3.5 50 - 6 8 25 1100 134d336(1)075c(2)(3) 110 f 1.30 2 10 16 - 8 20 - 18 8 30 1900 134d117(1)075f(2)(3) 330 t 1.00 3 30 8 - 30 12 - 50 10 25 2300 134d337(1)075t(2)(3) 470 k 0.90 5 50 6 - 20 7 - 40 10 40 2550 134d477(1)075k(2)(3) 100 v dc at 85 c; 65 v dc at 125 c; 60 v dc at 200 c 15 c 3.50 1 5 95 - 2.5 100 - 4 8 25 950 134d156(1)100c(2)(3) 68 f 2.10 2 10 25 - 6 30 - 14 8 25 1500 134d686(1)100f(2)(3) 150 t 1.60 3 25 14 - 12 18 - 30 8 22 1800 134d157(1)100t(2)(3) 220 k 1.20 5 50 13 - 44 16 - 55 8 15 2200 134d227(1)100k(2)(3) 125 v dc at 85 c; 85 v dc at 125 c; 75 v dc at 200 c 10 c 5.50 1 5 145 - 2.5 150 - 4 8 20 750 134d106(1)125c(2)(3) 47 f 2.30 2 10 35 - 5 40 - 12 7 20 1450 134d476(1)125f(2)(3) 50 f 2.30 3 10 35 - 5 40 - 12 7 20 1450 134d506(1)125f(2)(3) 100 t 1.80 3 25 24 - 20 30 - 35 8 20 1700 134d107(1)125t(2)(3) 150 k 1.60 5 50 13 - 10 16 - 28 6 12 1900 134d157(1)125k(2)(3)
134d www.vishay.com vishay sprague revision: 21-mar-13 3 document number: 40072 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? part number definitions: (1) capacitance to lerance: x9 = 10 %, x0 = 20 % (2) style number: 8 = no film insulation , 6 = high temperature film isulation (3) termination: blank = standard tin/lead, e3 = rohs compliant 100 % tin extended ratings capacitance at 25 c 120 hz (f) case code max. 120 hz esr ( ? ) max. dcl (a) max. imp, z at - 25 c ( ? ) max. ? cap. at - 25 c (%) typ. imp., z at - 55 c ( ? ) typ. ? cap. at - 55 c (%) typ. ? cap. (%) ac ripple 85 c 40 khz (ma) rms part number 25 c 85 c/ 125 c 85 c 125 c 50 v dc at 85 c; 30 v dc at 125 c; 30 v dc at 200 c c f t k 60 v dc at 85 c; 40 v dc at 125 c; 36 v dc at 200 c c f t 1000 k 0.50 20 120 3 - 25 < 4.5 < - 55 < 12 < 15 3500 134d108(1)060k(2)(3) 75 v dc at 85 c; 50 v dc at 125 c; 45 v dc at 200 c c 180 f 1.50 5 25 30 - 35 15 20 2000 134d187(1)075c(2)(3) t 750 k 0.60 20 120 3 - 25 < 6.0 < - 60 < 10 < 15 3500 134d757(1)075k(2)(3) 100 v dc at 85 c; 65 v dc at 125 c; 60 v dc at 200 c c f 220 t 1.60 5 30 15 - 40 15 - 45 10 15 1800 134d227(1)100t(2)(3) 400 k 0.70 10 120 5 - 15 15 - 55 10 15 3250 134d407(1)100k(2)(3) 125 v dc at 85 c; 85 v dc at 125 c; 75 v dc at 200 c c f t k
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
